Mining Products
Text Box: Elastomeric extrusions in various sizes. Used to bridge structural expansion gaps to keep dirt and water from entering the joint. Typically used on bridge decks and car park decks.

Ausflex, Fermaseal and WABO compression seals

Used for line loads from 75 kN/m to 500 kN/m. A simple and economical movement joint system. Mainly used on corbels supporting car park decks or building slabs.
Text Box: Slipjoint—SJJ

Bearings

Expansion Joints
Text Box: Polymer nosing system (900 PNS) with Silicone sealant (902 RCS). A fast installation, and extremely durable expansion joint system for 10 to 70 mm movement capacity. Predominantly used for rehabilitation of expansion joints.

X.J.S System

Based on a Grafab/Graflon pad sliding on stainless steel, these bearings are designed as a point loaded slipjoint. B series bearings can be designed as fixed, guide slide or free float with a variety of backing plate and holding bolt arrangements.

Structural Bearings series D and B

A patented 100% waterproof expansion joint system, WIZFLEX is used in open air car park structures, shopping centers, roof tops and any application where movement accommodation needs to take place with absolute 100% watertightness. Patented system.

Granor WIZFLEX system

Viscous dampeners used to “lock-up” structures under high acceleration impact events such as seismic or train braking forces. Using LUD’s to absorb such “impact” loads can greatly reduce expansion joint and bearing movement requirements, thereby also reducing their cost significantly.

Lock Up Devices

Special products
Text Box: Based on a Grafab/Graflon pad sliding on stainless steel, these bearings are designed as a point loaded slide bearing. BGSU bearings are extensively used to support conveyor galleries and prevent uplift from wind loads.

Structural Bearings type BGS(U)—Anti-Uplift slide bearings

Fibreglass soil and rock anchors. Solid or Hollow tube, these anchors do not damage excavating equipment, thereby making tunneling of reinforced vertical face faster and trouble-free.

Granor Fiborod

HTSR bars offer high stress capacity with 10% ductility, allowing for “flexible” connections. Designing with HTSR bars can reduce the sub-structure reinforcement requirements significantly, and consequently lower the cost of the entire project.

High Tension Stress Relieved bars—(HTSR)
Text Box: Rubber Fenders are a critical component in the berthing of all types of vessels from small work boats, to ocean going bulk carries. Granor Rubber & Engineering Pty Ltd. through their association with IRM Offshore & Marine Engineering Pvt. Ltd. are able to offer an extensive range of Rubber Fenders to suit most marine applications. Such fender types include Cell, Cone, Arch, Pneumatic, Leg and Cylindrical. The versatility of IRM’s manufacturing facility enables us to supply an extensive variety of replacement fenders. .

Marine Fenders

Granor can supply all types of rubber sheet and roll products, from conveyor belt to custom cut and drilled conveyor gallery curtains and protection mats..Contact us with your specific requirements.

Rubber mats, belts, conveyor curtains ...

Granor’s manufacturing plant has the capability to manufacture custom designed parts in steel, aluminium, rubber, plastics and other materials. Contact us to discuss your requirements.

Custom Fabrication and rubber extrusions/Moulding

Modular rubber panel type expansion joint systems.

Waboflex and Transflex rubber segmental joints
Text Box: Seamless expansion joint system for noise-free, very comfortable ride joints of maximum +/- 25 mm movement capacity.

Asphaltic plug joints—THORMA joints— (APJ)

An easy and quick to install rubber seal system specially developed for use in Highway noise wall joints. Available in black, grey or tan colour and various polymers. Minimum order—50 m roll. Patented system.

Grafin seal

Economical rubber sealing strip specially designed as a weather membrane installed between pre-cast wall panels on bridge abutments or industrial buildings. Minimum order– 50 m roll.

Baffle strip—Weather strip

Formwork seals of all types. Used to form rebates in concrete constructions from drip grooves to shear keys and between formwork-etc...

Graform seals

Leaders in structural bearing and movement accommodation.

Granor Rubber and Engineering PTY.LTD

Fixed, Free Float or Guide Slide pot bearings available in galvanized or painted mild steel or stainless steel. Anti-uplift design also available. Custom designed to suit client’s specific requirements. All Granor Pot bearings comply with AS5100.4 and can be NATA tested.

Pot Type Structural Bearings

Natural rubber or Neoprene rubber laminated bearings for bridges and large structures. Vibration and impact isolation designs also available. All Granor Laminated bearings comply with AS5100.4 and can be NATA tested.
Text Box: Elastomeric Laminated Bearings (ELB’s)

Natural rubber or Neoprene plain rubber pad or strip from 3 to 25 mm thick for bridge abutments or to support pre-cast panels

Plain bearing pad / Strip

Wabo modular joints from 160 mm to 1500 mm movement capacity for long bridges. Seismic Wabo X-cell modular joints also available.

Modular Expansion joints

ETIC Aluminium and Steel finger joints for 110 mm to 500 mm movement accommodation.

Finger joints

Single seal expansion joint for max 85 mm movement accommodation. For car parks decks and short span bridges. Complies with AS5100.4

Strip seal expansion joint Series - ACB and AC-AR
Text Box: More details...

Infrastructure Products

Polyether Urethane disk bearings offer many advantages over the conventional Pot bearings. Easily inspected with their exposed load bearing disk, simple design and proven performance often result in a more economical outcome.

DISK Bearings